Monthly Archives: May 2011

Publishing PRTG Network Monitor through TMG 2010

I encountered an issue where certain graphs would not display at all when accessing PRTG Network Monitor 8.4.1.2282 on the outside of a Microsoft TMG 2010 firewall, and an error would be displayed every minute or so when I was … Continue reading

Posted in Microsoft Server | Leave a comment

Draytek SNMP OIDs for Monitoring

Vigor Routers support MIB II. Please download the standard MIB II and ADSL-LINE-MIB. The items below are the ADSL-LINE-MIB that Vigor Routers support. OID for supported ADSL LINE MIB ———————————————————- 1.3.6.1.2.1.10.94.1.1.1.1.1 adslLineCoding 1.3.6.1.2.1.10.94.1.1.1.1.2 adslLineType 1.3.6.1.2.1.10.94.1.1.1.1.3 adslLineSpecific 1.3.6.1.2.1.10.94.1.1.1.1.4 adslLineConfProfile 1.3.6.1.2.1.10.94.1.1.1.1.5 adslLineAlarmConfProfile … Continue reading

Posted in ADSL | Leave a comment

Billion 7404VGPM SNMP OIDs for Monitoring

PPP uptime is 1.3.6.1.2.1.2.2.1.9.6 but the value returned is in timeticks. timeticks are 100ths of a second since system boot time. system uptime – (timeticks/100) = ppp uptime Downstream: SNR: 1.3.6.1.2.1.10.94.1.1.2.1.4.3 Attenuation: 1.3.6.1.2.1.10.94.1.1.2.1.5.3 Sync Speed: 1.3.6.1.2.1.10.94.1.1.4.1.2.3 Upstream: SNR: 1.3.6.1.2.1.10.94.1.1.3.1.4.3 Attenuation: … Continue reading

Posted in ADSL | Leave a comment

Steps to setup a new FTP site in IIS 7.5

Assuming the FTP Virtual server has been configured already, setup access to a new site as follows: ​Under the settings for the Web Server (Root node) select IIS Manager Users and create and enable a new user. Under the Root FTP … Continue reading

Posted in Microsoft Server | Leave a comment

WordPress updates failing

The fix the problem of WordPress updates not working do the following :- Give the IUSR account modify permissions to the wordpress folder on your web site.

Posted in Wordpress | Leave a comment

Add script mappings for Perl after ActivePerl Installation (IIS 7.5 64-bit)

Run the following commands: C:\Perl64\bin>ap-iis-config list sites (to get the list of sites and their numbers) ap-iis-config add map –ext .pl –site <sitenumber> –type cgi

Posted in Microsoft Server | Leave a comment

FTP User Isolation in IIS 7.5

To configure the IIS Manager FTP Users and FTP User Isolation in IIS 7.5 I followed the following articles…. http://learn.iis.net/page.aspx/305/configuring-ftp-75-user-isolation/ http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/

Posted in Microsoft Server | Leave a comment

Moving SharePoint content databases to another installation

Steps I followed to move my SharePoint (WSS v3) Content Databases to SharePoint 2010 on another server (including upgrade) were:- Detach DB from SQL2008 on original server using SQL Management Studio. Copy the .mdf and .ldf files for the content … Continue reading

Posted in Microsoft Server | Leave a comment

Anonymous Relay on Exchange 2010

To configure anonymous relay in Exchange 2010 I had to create a receive connector on the Hub Transport server and run a powershell command. Anonymous relay is restricted to individual IP addresses in this scenario. The process is described in … Continue reading

Posted in Microsoft Server | Leave a comment

Monitoring non-domain members with SCOM 2007 R2

To monitor non-domain members I had to do the following:- Add the CA’s certificate to the Trusted Root Certification Authorities store on both the RMS and the Monitored server. Create a certificate for both the RMS and monitored server with … Continue reading

Posted in Microsoft Server | Leave a comment